Poco F1 Flash File (Global Fastboot)

 

Device: Poco F1
Codename: beryllium_global
Version: All
Branch: Stable

Type: Fastboot

How to Flash Mi Phones in Fastboot Mode:

Before start check this:

• Charge your phone to at least 50% before flashing your phone.
• To flash the phone in Fastboot mode, the bootloader must first be unlocked.

1. Download the most recent firmware for the chosen model first.
2. Firmware (Stock Rom) will be in a tgz file; use WinRAR, 7zip to extract it.
3. Extract it on Desktop Or C Drive Recommended
4. Launch Mi Flash Tool, then select flash_all.bat file.
5. Press the phone's volume down and power buttons simultaneously to activate Fastboot mode.
6. To flash the phone in Fastboot mode, the bootloader must first be unlocked.
7. When you choose a file and then select Refresh, the com port will appear.
8. The most crucial step is to choose clean all in Mi Flash below.
9. Click Flash, then wait for it to finish.

if it shows error then try EDL Mode Flashing!

How to Flash Poco F1 in EDL Mode:

1- Connect phone through USB cable to PC and unplug battery.

2- Short Test Point and connect battery.

3- Under Device Manger, port of Qualcomm HS USB QLoader 9008 port will appear.

4- Download & run MI Flash Tool

5- Place the Flash File on Desktop.

6- Assign the Folder path.

7- Click on refresh & then tap Flash button.




Poco F1 Firmware Flash File Download Link (Global):

Direct Download, Only Click On Version!


Android 10:- V12.0.3.0.QEJMIXM

Android 10:- V11.0.9.0.QEJMIXM

Android 9:- V11.0.5.0.PEJMIXM

Android 9:- V10.3.5.0.PEJMIXM

Android 8.1:- V9.6.14.0.OEJMIFD



Official Site Link: Click Here



Mi Fastboot Mode Full Tutorials: Click Here

Mi EDL Mode Full Tutorials: Click Here