Redmi Note 4 Flash File (Global Fastboot)

Device: Redmi Note 4
Codename: mido_global
Version: All
Branch: Stable
Type: Fastboot



How to Flash Mi Phones in Fastboot Mode:

Before start check this:

• Charge your phone to at least 50% before flashing your phone.
• To flash the phone in Fastboot mode, the bootloader must first be unlocked.

1. Download the most recent firmware for the chosen model first.
2. Firmware (Stock Rom) will be in a tgz file; use WinRAR, 7zip to extract it.
3. Extract it on Desktop Or C Drive Recommended
4. Launch Mi Flash Tool, then select flash_all.bat file.
5. Press the phone's volume down and power buttons simultaneously to activate Fastboot mode.
6. To flash the phone in Fastboot mode, the bootloader must first be unlocked.
7. When you choose a file and then select Refresh, the com port will appear.
8. The most crucial step is to choose clean all in Mi Flash below.
9. Click Flash, then wait for it to finish.

if it shows error then try EDL Mode Flashing!



How to Flash Redmi Note 4 in EDL Mode:


1- Connect phone through USB cable to PC and unplug battery.

2- Short Test Point and connect battery.

3- Under Device Manger, port of Qualcomm HS USB QLoader 9008 port will appear.

4- Download & run MI Flash Tool

5- Place the Flash File on Desktop.

6- Assign the Folder path.

7- Click on refresh & then tap Flash button.



Redmi Note 4 Firmware Flash File Download Link (Global):
Direct Download, Only Click On Version!

Android 7:- V11.0.2.0.NCFMIXM

Android 7:- V10.2.3.0.NCFMIXM Link 2

Android 7:- V9.5.8.0.NCFMIFA

Android 7:- V9.0.3.0.NCFMIEI

Android 6:- V8.1.15.0.MCFMIDI


Official Download Link: Click here


Mi Fastboot Mode Full Tutorials: Click Here

Mi EDL Mode Full Tutorials: Click Here