NOTE:
1. This tweak was initiated for the main purpose of educating our readers, we will Not be held responsible if this info is used for any illegal activity.
2. We reserve the right that if you get your device bricked during the process stated below, We won't be held responsible for any Damages. Meanwhile this post should be useful if your MTK phone is having problem registering your SIM to your network. Probably due to change of location. That's by the way, but we assure damaging your device during procedure is nothing to worry about, you'll get it successfully done within seconds if you follow the Steps below carefully: -
Materials Needed
1. A Rooted Android *although Not compulsory coz it works without rooting most MTK devices* (MTK 6577 / 6575)
2. A valid IMEI number
3. The MobileUncle MTK Tools
After getting the above ready, follow the Procedures below:
1. Dial *#06#, write down your Default IMEI, or Simply Back it up on ur SDcard >> See this
2. Run the MobileUncle tools App
Download Here
install app from google play
3. Go to >> Engineer Mode >> Engineer Mode (MTK)
4. Scroll down to CDS Information
5. CLICK >> Radio Information after that Select Phone1 (for the first IMEI)
6. At the top there is a command line which begins “AT+” just type there “AT +EGMR=1,7,”IMEI_1" (Put your first IMEI number number)
[ ie.,you want to change the the phone 1 IMEI AT+EGMR=1,7,”NEW IMEI NO”]
7. Hit send command and you will / may get a confirmation that "sent to mSend".
8. Now go back and select “Phone2? (for the second IMEI number)
9. At the top there is a command line which begins “AT+” just type there “AT +EGMR=1,10,”IMEI_2? (Put your second IMEI number)
10. Reboot your phone and check you IMEI number (Dial *#06#).
Second Method: -
1. Go to Engineering Mode with this code * # * # 3646633 # * # *
2. Type it on call pad
3. Engineering Mode show on your phone screen
4. Go to CDS info
5. Go to Radio info
6. then go to Phone1 (For the first IMEI No)
7. At the top there is a command line which begins "AT+" just type there "AT +EGMR=1,7,"IMEI_1" (Instead of IMEI_1 put your first IMEI No)
8. Hit send command
9. If you done just reboot the phone
10. If you change the second IMEI No then go to step 2 and select "Phone2"
11. And enter the code "AT +EGMR=1,10,"IMEI_2" (Instead of IMEI_2 put your second IMEI No)
12. Hit send command
13. Reboot your phone
0 Comments